歡迎光臨樂清市美格爾電子電器有限公司官方網站!

>美格爾

聯系我們

  • 聯系電話:

    0577-62875133

  • 傳真:

    0577-62987133

  • E-mail:

    mgr@mgr.top

單相固態繼電器

當前位置:首頁 > 產品總匯 > 產品中心 > 單相固態繼電器

MGR-1D48直流控制直流固態繼電器

所屬:單相固態繼電器

產品介紹

◎ 型號含義 Type meaning

`image.png`/

① 1 路 One channel

② 控制電壓 3-32VDC Control voltage 3-32VDC

③ 直流控直流 DC-DC (DC input-DC output)

④ 負載電壓 5-220VDC

Load voltage 5-220VDC

⑤ 10A, 20A, 25A, 30A, 40A, 50A, 60A, 75A, 80A,90A,100A


◎ 產品概述 Product overview

◆ 直流固態繼電器易并聯,適合大電流應用場合

◆ 額定電流:10A-100Amps

◆ 額定電壓:5-220VDC

◆ 控制電流:≤ 40mA

◆ 低輸出斷態漏電流

◆ 低阻抗 MOSFET 輸出,最大限度減少總功耗

◆ 適合阻性負載和感性負載 ( 感性負載如電機和 EMR/電磁線圈等必須加裝抑制二極管 )

◆ 具有 LED 燈輸出指示

◆ 包含標準輸出的 R-C 緩沖器

◆ 透明保護蓋為用戶提供額外保護


◆ DC solid state relays are easy to connect inparallel, suitable for high current applications

◆ Rated current: 10A-100Amps

◆ Rated voltage: 5-220VDC

◆ Control current: ≤ 40mA

◆ Low output off-state leakage current

◆ Low-impedance MOSFET as the outputcomponent minimize the total power consumption

◆ Suitable for resistive load and inductive load(the inductive load, such as motor and EMR /electromagnetic coil, must be equipped with thesuppressor diode)

◆ Display output status via LED

◆ Standard output R-C buffer

◆ Transparent cover for extra protection


注意 :

1. 當負載電流為 10A 時 , 必須加裝散熱器 ; 為 40A 及以上時 , 必須加風扇強冷或水冷 .

2. 使用感性負載時 , 務必在輸出端并接一個壓敏電阻 , 取值為負載電壓的 1.6-1.9 倍 .


Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.


◎ 安裝尺寸及接線圖 Installation dimensions and wiring diagram


`image.png`/

注:特殊電壓可定做。Note: Specific voltage can be customized.

關注微型平臺

Copyright ? 2020 樂清市美格爾電子電器有限公司 All Rights Reserved 版權. 浙ICP備0522718號